CFM60M050 ，CFM60M120，CFM60M150，CFM60M240，60W AC-DC 開關電源

更新時間：2023-04-22

簡要描述：

* Universal Input Range 90-264VAC
* Efficiency to 9
* Continuous Short Circuit Protection
* Meets EN60601-1 and EN55011 Class B
* No load Power Consumption<0.5W
* 2"x 4" Size

發郵件給我們：sales1@haonpower.com

西安浩南電子科技有限公司

：
: 2511137526
：tian@haonpower.com
地址：C座30619室
：710075
：www.haonpower.com

* Universal Input Range 90-264VAC

* Efficiency to 9

* Continuous Short Circuit Protection

* Meets EN60601-1 and EN55011 Class B

* No load Power Consumption<0.5W

* 2”x 4” Size

MODEL	OUTPUT VOLTAGE	MAX. LOAD	MIN. LOAD	RIPPLE & NOISE	VOLTAGE ACCURACY	VOLTAGE ADJ. Range	LINE REGULATION	LOAD REGULATION	% EFF（1）（Typ.）
CFM60M050	5V	8A	0A	1%	±1%	4.75~5.25	±0.5%	±1%	82%
CFM60M120	12V	5A	0A	1%	±1%	11.4~12.6	±0.5%	±1%	87%
CFM60M150	15V	4A	0A	1%	±1%	14.25~15.75	±0.5%	±1%	88%
CFM60M240	24V	2.5A	0A	1%	±1%	22.8~25.2	±0.5%	±1%	89%
CFM60M480	48V	1.25A	0A	1%	±1%	45.6~50.4	±0.5%	±1%	9

Specifications

INPUT SPECIFICATIONS:
Voltage …....………........…............................................... 90~264Vac
Frequency ………………………………………………………..... 47 to 63Hz
Inrush Current ………………….…………...................... 75A max. @240Vac
Input Current ……….………………. 100Vac/1.6A max., 240Vac/0.8Amax.
Leakage Current ……………………………………….…...…… 100uA max.
OUTPUT SPECIFICATIONS:
Holdup Time …………………………..……………….… 16ms typ. @115Vac
Short Circuit Protection …………….....…... Hiccup Mode （Auto Recover）
Over Voltage Protection ………………...…….... TVS Component to Clamp
Temperature Coefficient ……………………............................... ±0.05%/℃
GENERAL SPECIFICATIONS:	SAFETY AND EMC:
Isolation ……………………..……………..…… Input to output = 5,656VDC	Emission and Immunity ……….. EN55011 Class B, FCC CFR 47 Part 18
Operating Temperature .......................... -20 ~ 50℃℃（see Derating Curve）	EN60601-1-2, EN61000-3-2, EN61000-3-3
Storage Temperature …………………………....….......…........ -20~85℃℃	Safety ……………………….……… IEC60601-1, EN60601-1, UL60601-1
Humidity ..................................................... 93% RH max. Non-Condensing	NOTE:
Cooling ………………………..…………………..……..... Natural Convection	1. Voltage accuracy is set at full load.
Switching Frequency …………………………………….……. 65KHz Typical	2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for
MTBF ……………….… MIL-HDBK-217F, GB, 25℃/115VAC …… T.B.D hrs	Ripple & Noise measuring @20MHz BW.
Altitude ……………………..……………………….…………………… 3000m	3. Line regulation is measured from 100Vac to 240Vac with full load.
Dimensions ……….….. 4.000x2.000x1.100inches （101.6x50.8x27.94mm）	4. Load regulation is measured from 1 to full load.